General information
Center name
SSAB
Country
Publish Date
July 26, 2021
Description of the case
The advantage of manufacturing out of Hardox® is a much lower manufacturing cost than fabricating and installing liners, thus lowering capital cost for customers. Common practice is to replace lined spouts NOT when liner is worn, but rather when outer mild steel casing is worn through, making the outer casing redundant.
The previous material was AR200 or Ceramic tile
-
Liner plate
-
0 – 250 °C / 32 – 480 °F
-
< 10 mm / < 0.4 "
-
Grains
Old solution
Old solution
Thickness
Service life
New solution
New solution
Hardox® 500
Thickness
6 or 5 mm (3/16 or 1/4 ln)
Service life
Double
Key success factors
Improved service life
+50%